← All learning notes

Natural frequency and damping in a single-degree-of-freedom system

Relate mass, stiffness and damping to the free response.

fₙ = √(k/m) ÷ 2π, ζ = c ÷ (2√km)

Model

With no forcing, the linear mass–spring–damper model satisfies m ẍ + c ẋ + kx = 0. Here m is mass in kg, k is stiffness in N/m and c is viscous damping in N·s/m.

Undamped frequency

ωₙ = √(k/m) in rad/s, and fₙ = ωₙ/(2π) in Hz. Increasing stiffness raises this frequency. Increasing mass lowers it.

Damping ratio

The critical damping coefficient is cᶜ = 2√(km) and ζ = c/cᶜ. For 0 < ζ < 1 the response is underdamped. At ζ = 1 it is critically damped, and for ζ > 1 it is overdamped. With c = 0 the system is undamped.

Example

With m = 10 kg, k = 4,000 N/m and c = 100 N·s/m, ωₙ = 20 rad/s, fₙ ≈ 3.183 Hz and ζ = 0.25. The oscillatory component has f_d = fₙ√(1 − ζ²) ≈ 3.082 Hz and a period near 0.324 s. At or above critical damping there is no oscillatory damped frequency.

Application limits

Real structures can have multiple modes, nonlinear contacts and temperature-dependent properties. Distinguish the free or transient response from a forced steady-state signal when comparing with measurements or FFT results.

Formula reference ↗