← All learning notes

Axial stress and strain

Understand average normal stress, relevant units and the assumptions behind F/A.

σ(MPa) = F(N) ÷ A(mm²)

Average normal stress

A centric axial force F applied to an area A produces an average normal stress σ = F/A. Stress increases with force and decreases as area increases.

Why N/mm² equals MPa

1 mm² = 10⁻⁶ m², so 1 N/mm² = 10⁶ N/m² = 1 MPa. A 12,000 N tensile load over a 300 mm² net section gives 40 MPa.

Stress and strain

Stress is force per area. Normal strain is the fractional change in length. In linear elasticity their relation is governed by the elastic modulus. Length and stiffness affect deformation even when the average stress is the same.

Signed compression and net sections

With tension positive, a 9,000 N compressive force over 450 mm² gives −20 MPa. Net area can describe the average stress across a section containing a hole. The local peak near the edge of the hole needs separate analysis.

Application limits

Bending, torsion, eccentric loading, stress concentrations, buckling and weld details are outside this model. Evaluate strength, design limits and safety factors using appropriate standards and methods.

Formula reference ↗