← All learning notes

Spherical particle mass and packed bulk density

Estimate mass and check the effect of changing radius in a DEM model.

m(kg) = ρ(kg/m³) × (4π/3) × [r(mm)/1000]³

Sphere volume and mass

For a solid sphere of uniform density, V = (4/3)πr³ and m = ρV. Convert an input radius in mm to meters before using a density in kg/m³.

Worked example

For r = 7.5 mm = 0.0075 m, V ≈ 1.767 × 10⁻⁶ m³. At 2,600 kg/m³ the mass is about 0.004595 kg, or 4.595 g. One thousand identical spheres weigh about 4.595 kg in total.

Packing and voids

Solid density describes the solid material. Bulk density is total particle mass divided by the full occupied volume, including voids. Packing, boundaries and size distribution can change bulk density even when particle masses remain the same.

Size sensitivity

At the same solid density and count, changing the radius from 7.5 mm to 6 mm gives (6 ÷ 7.5)³ = 0.512 times the original total mass. Keeping roughly the same mass would require about 1/0.512 ≈ 1.95 times as many spheres.

DEM assumptions

Clumps and non-spherical particles require the model’s actual volume and mass rules. Check how your software handles overlap within clumps, units and effective density before using the values.

Formula reference ↗