Mass per total volume
Bulk density divides total mass by a representative volume that includes interparticle voids. Solid density uses only the solid material volume. Packing and compaction can change the bulk density without changing the solid density.
Convert cubic units
1 mm = 10⁻³ m, so 1 mm³ = 10⁻⁹ m³. A 200 mm cube has a volume of 8,000,000 mm³ = 0.008 m³. With 12.8 kg of material, the bulk density is 1,600 kg/m³.
Relative error
For a target of 1,650 kg/m³, the signed difference is −50 kg/m³ and the absolute relative error is 50 ÷ 1,650 × 100 ≈ 3.03%. The target is the denominator and must be positive for this calculator.
A smaller measurement region
A 50 mm cube has a volume of 125,000 mm³. If 0.200 kg is assigned to the region, its bulk density is 0.200 ÷ (125,000 × 10⁻⁹) = 1,600 kg/m³. Use dry soil mass for dry bulk density and record the particle inclusion rule at sampling boundaries.
Calibrating a particle model
An agreement in bulk density does not establish that a model reproduces flow, shear resistance or contact behavior. Compare independent measurements and repeat runs under consistent sampling conditions.